Ford 2009 E-450 v.2 Manuel d'utilisateur télécharger pdf (Page 57)

100

101

Replacing high-mount brakelamp bulbs

On vehicles without a rear headliner, the interior cargo lamp (if

equipped) will have to be removed from under the high-mount

brakelamp assembly located inside the vehicle. Then, do the following:

1. Remove the two screws from the

high-mount brakelamp assembly and

lift the lamp from the vehicle.

2. Remove the bulb socket from the

lamp assembly by turning

counterclockwise.

3. Carefully pull the bulb straight

out of the socket.

To install the new bulb, follow the removal procedure in reverse order.

Replacing license plate lamp bulbs

1. Turn the headlamp switch to the

off position.

2. Remove the two screws and the

license plate lamp assembly from

the rear door.

3. Remove bulb socket from lamp

assembly by turning

counterclockwise.

4. Pull the bulb out from socket and

push in the new bulb.

To install the new bulb, follow the removal procedures in reverse order.

2009 Econoline (eco)

Owners Guide, 2nd Printing

USA (fus)

Lights

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 319 320

Commentaires sur ces manuels

Pas de commentaire

Ford 2009 E-450 v.2 Manuel d'utilisateur Page 57

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2009 E-450 v.2