Ford 2009 E-450 v.2 Manuel d'utilisateur télécharger pdf (Page 55)

100

101

Replacing headlamps (sealed beam)

1. Make sure the headlamp switch is in the off position and open the

hood.

2. Remove the four screws from the

top and bottom front of the

headlamp assembly and carefully

remove the lamp/bezel.

3. Remove the four screws and the

retaining ring.

4. Disconnect the electrical

connector from the lamp and

remove the lamp.

To install the new lamp, follow the

removal procedures in reverse order.

Replacing front parking lamp/turn signal bulbs

1. Make sure the headlamp control is in the off position.

2. Remove the headlamp assembly, refer to Replacing headlamp bulbs

in this section.

Aerodynamic

Sealed beam

2009 Econoline (eco)

Owners Guide, 2nd Printing

USA (fus)

Lights

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 319 320

Commentaires sur ces manuels

Pas de commentaire

Ford 2009 E-450 v.2 Manuel d'utilisateur Page 55

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2009 E-450 v.2