Ford 2008 Explorer v.2 Manuel d'utilisateur télécharger pdf (Page 91)

100

101

PANEL DIMMER CONTROL

Use to adjust the brightness of the

instrument panel when exterior

lights are on.

• Rotate the thumbwheel from left

to right to brighten the

instrument panel.

• Rotate the thumbwheel from right

to left to dim the instrument

panel.

• Rotate fully to the right (past detent) to turn on interior lamps.

• Rotate to the left position (past detent) to turn off the interior lamps

and to disable the illuminated entry feature. When the control is in the

far left position, it acts as a dome lamp defeat/override.

Note: If the battery is disconnected, discharged, or a new battery is

installed, the dimmer switch requires re-calibration. Rotate the dimmer

switch from the full dim position to the full Dome/ON position to reset.

This will ensure that your displays are visible under all lighting

conditions.

AIMING THE HEADLAMPS

The headlamps on your vehicle are properly aimed before leaving the

assembly plant. If your vehicle is involved in an accident or if you have

problems fixing the alignment of your headlamps, have them checked by

a qualified service technician.

Headlamp aim adjustment

The headlamps on your vehicle can only be vertically adjusted. Your

vehicle does not require horizontal aim adjustments.

To adjust the headlamps:

1. Park your vehicle on a level surface about 25 feet (7.6 meters) away

from a vertical plain surface (3). Check your headlamp alignment at

night or in a dark area so that you can see the headlamp beam pattern.

2008 Explorer (exp)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 399 400

Commentaires sur ces manuels

Pas de commentaire

Ford 2008 Explorer v.2 Manuel d'utilisateur Page 91

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2008 Explorer v.2