Ford 2008 Explorer v.2 Manuel d'utilisateur télécharger pdf (Page 188)

After any vehicle collision, the combination lap and shoulder belt

system at all passenger seating positions must be checked by an

authorized dealer to verify that the “automatic locking retractor”

feature for child seats is still functioning properly, in addition to other

checks for proper safety belt system function.

BELT AND RETRACTOR ASSEMBLY MUST BE REPLACED if

the safety belt assembly “automatic locking retractor” feature or

any other safety belt function is not operating properly. In addition, all

safety belts should be checked for proper function. Failure to replace

the belt and retractor assembly could increase the risk of injury in

collisions.

Safety belt pretensioner

Your vehicle is equipped with safety belt pretensioners at the driver and

right front passenger seating positions.

The safety belt pretensioner tightens the safety belts firmly against the

occupant’s body at the start of the crash.

When the Safety Canopy™ system, seat-mounted side airbags, and/or the

front airbags are activated, the safety belt pretensioners for the driver

and right front passenger seating positions will be activated when the

respective seatbelt is properly buckled.

The driver and front passenger safety belt system (including

retractors, buckles and height adjusters) must be replaced if the

vehicle is involved in a collision that results in deployment of front

airbags, seat-mounted side airbags and Safety Canopy™, and safety

belt pretensioners.

Refer to the Safety belt maintenance section in this chapter.

2008 Explorer (exp)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

188

1 2 ... 183 184 185 186 187 188 189 190 191 192 193 ... 399 400

Pas de commentaire

Ford 2008 Explorer v.2 Manuel d'utilisateur Page 188