Ford 2008 E-450 v.3 Manuel d'utilisateur télécharger pdf (Page 69)

5. Within 10 seconds of removing the second coded key, insert the new

unprogrammed key (new key/valet key) into the ignition and turn the

ignition from the 3 (OFF) position to the 4 (ON) position (maintain

ignition in the 4 (ON) position for at least one second, but no more than

ten seconds). This step will program your new key to a coded key.

6. To program additional new unprogrammed key(s), repeat Steps 1

through 5.

If successful, the new coded key(s) will start the vehicle’s engine and the

theft indicator will illuminate for three seconds and then go out.

If not successful, the new coded key(s) will not start the vehicle’s engine

and the theft indicator will flash on and off and you may repeat Steps 1

through 5. If failure repeats, bring your vehicle to your authorized dealer

to have the new spare key(s) programmed.

2008 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Locks and Security

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 284 285

Pas de commentaire

Ford 2008 E-450 v.3 Manuel d'utilisateur Page 69