Ford 2008 E-450 v.3 Manuel d'utilisateur télécharger pdf (Page 269)

Changing the air filter element

1. Disconnect the fresh air inlet tube

from the radiator support.

2. Open the clamp that secures the

two halves of the air filter housing

together.

3. Carefully separate the two halves

of the air filter housing.

4. Remove the air filter element

from the housing.

5. Install a new air filter element. Be careful not to crimp the filter

element edges between the air filter housing. This could cause filter

damage and allow unfiltered air to enter the engine if not properly

seated.

6. Replace the two halves of the air filter housing and secure the clamp.

7. Connect the fresh air inlet tube to the radiator support.

Note: Failure to use the correct air filter element may result in severe

engine damage. The customer warranty may be void for any damage to

the engine if the correct air filter element is not used.

2008 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

269

1 2 ... 264 265 266 267 268 269 270 271 272 273 274 ... 284 285

Pas de commentaire

Ford 2008 E-450 v.3 Manuel d'utilisateur Page 269