Ford 2008 E-450 v.3 Manuel d'utilisateur télécharger pdf (Page 45)

100

101

Sealed beam

3. Rotate the bulb socket counterclockwise and remove.

4. Carefully pull the bulb straight out of the socket.

To complete installation, follow the removal procedures in reverse order.

Replacing high-mount brakelamp bulbs

On vehicles without a rear headliner, the interior cargo lamp (if

equipped) will have to be removed from under the high-mount

brakelamp assembly located inside the vehicle. Then, do the following:

1. Remove the two screws from the

high-mount brakelamp assembly and

lift the lamp from the vehicle.

2. Remove the bulb socket from the

lamp assembly by turning

counterclockwise.

3. Carefully pull the bulb straight

out of the socket.

To install the new bulb, follow the removal procedure in reverse order.

2008 Econoline (eco)

Owners Guide (post-2002-fmt)

USA (fus)

Lights

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 284 285

Commentaires sur ces manuels

Pas de commentaire

Ford 2008 E-450 v.3 Manuel d'utilisateur Page 45

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2008 E-450 v.3