Ford 2007 Five Hundred v.2 Manuel d'utilisateur télécharger pdf (Page 253)

1. Before you begin, turn the engine off and let it cool.

2. When the engine is cool, wrap a thick cloth around the coolant

pressure relief cap on the coolant reservoir (an opaque plastic bottle).

Slowly turn cap counterclockwise (left) until pressure begins to release.

3. Step back while the pressure releases.

4. When you are sure that all the pressure has been released, use the

cloth to turn it counterclockwise and remove the cap.

If coolant reservoir is empty, continue with steps 5–9, if coolant

reservoir level is only slightly low (coolant still in reservoir),

continue to Steps 5 and 6 only.

5. Fill the coolant reservoir slowly with the proper coolant mixture (see

above), to within the “COLD FILL RANGE” or the “FULL COLD” level on

the reservoir.

6. Replace the cap. Turn until tightly installed. (Cap must be tightly

installed to prevent coolant loss.)

7. Pull off metal pin and remove

coolant bleed plug from the

thermostat housing.

2007 Five Hundred (500)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

253

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 287 288

Pas de commentaire

Ford 2007 Five Hundred v.2 Manuel d'utilisateur Page 253