Ford 2007 Five Hundred v.2 Manuel d'utilisateur télécharger pdf (Page 254)

100

101

8. Add coolant/water mixture

through the thermostat housing

opening until full at housing

opening.

9. Install the thermostat housing

bleed plug. Install metal pin by

pushing into the slot.

After any coolant has been added, check the coolant concentration, refer

to the Checking engine coolant section. If the concentration is not

50/50 (protection to –34° F [–36° C]), drain some coolant and adjust the

concentration. It may take several drains and additions to obtain a 50/50

coolant concentration.

Whenever coolant has been added, the coolant level in the coolant

reservoir should be checked the next few times you drive the vehicle. If

necessary, add enough 50/50 concentration of engine coolant and

distilled water to bring the liquid level to the proper level.

2007 Five Hundred (500)

Owners Guide (post-2002-fmt)

USA (fus)

Maintenance and Specifications

254

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 287 288

Commentaires sur ces manuels

Pas de commentaire

Ford 2007 Five Hundred v.2 Manuel d'utilisateur Page 254

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2007 Five Hundred v.2