Ford 2007 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 218)

2. Locate the round access plug on

the underside of the steering

column cover.

3. Remove the access plug using a flat head screwdriver, then push the

override button using a flat head screwdriver, apply the brake pedal and

shift the transmission into N (Neutral).

4. Reinstall the access plug cover, start the vehicle and release the

parking brake.

Do not drive your vehicle until you verify that the brakelamps

are working.

Always set the parking brake fully and make sure the gearshift is

latched in P (Park). Turn the ignition to the OFF/LOCK position

and remove the key whenever you leave your vehicle.

If the parking brake is fully released, but the brake warning lamp

remains illuminated, the brakes may not be working properly.

See your authorized dealer.

Brake-shift interlock - floor-shift transmission

This vehicle is equipped with a brake-shift interlock feature that prevents

the gearshift lever from being moved from P (Park) when the ignition is

in the ON position unless the brake pedal is depressed.

If you cannot move the gearshift lever out of P (Park) with ignition in

the ON position and the brake pedal depressed, it is possible that a fuse

has blown or the vehicle’s brakelamps are not operating properly. Refer

to Fuses and relays in the Roadside Emergencies chapter.

If the fuse is not blown, perform the following procedure:

1. Apply the parking brake, turn the ignition to LOCK, then remove the

key.

2007 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Driving

218

1 2 ... 213 214 215 216 217 218 219 220 221 222 223 ... 343 344

Pas de commentaire

Ford 2007 F-150 v.1 Manuel d'utilisateur Page 218