Ford 2007 F-150 v.1 Manuel d'utilisateur télécharger pdf (Page 164)

2. Route the tether strap behind the

head restraint supports to a loop

behind an adjacent seating position,

and hook the strap hook onto the

loop. If using the driver’s side, pass

the strap behind the shoulder belt

mounting for the center seat.

• Always put the tether strap

through the routing loop. The

head restraint support post will

hold the child seat tightly, but the head restraint post is not strong

enough to hold the child seat during a collision.

3. Install the child safety seat tightly

using the LATCH anchors or safety

belts. Follow the instructions in this

chapter.

4. Tighten the tether strap

according to the child seat

manufacturer’s instructions.

Attaching safety seats with LATCH (Lower Anchors and Tethers for

Children) attachments for child seat anchors

Some child safety seats have two rigid or webbing mounted attachments

that connect to two anchors at certain seating positions in your vehicle.

This type of child seat eliminates the need to use safety belts to attach

the child seat. For forward-facing child seats, the tether strap must also

be attached to the proper tether anchor. See Attaching safety seats with

tether straps in this chapter.

2007 F-150 (f12)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

164

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 343 344

Pas de commentaire

Ford 2007 F-150 v.1 Manuel d'utilisateur Page 164