Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur télécharger pdf (Page 158)

you install a child seat at the center 2nd row position, use the vehicle

belt and the top tether anchor.

Follow the child seat manufacturer’s instructions to properly install a

child seat with LATCH attachments. The plastic LATCH guides can be

obtained from an authorized dealer. They snap onto the LATCH lower

anchors in the seat to help attach a child seat with rigid attachments.

The guides hold the seat trim away to expose the anchor and make it

easier to attach some child seats.

Attach LATCH lower attachments of the child seat only to the

anchors shown.

If you install a child seat with rigid LATCH attachments, do not tighten

the tether strap enough to lift the child seat off the vehicle seat cushion

when the child is seated in it. Keep the tether strap just snug without

lifting the front of the child seat. Keeping the child seat just touching the

vehicle seat gives the best protection in a severe crash.

Each time you use the safety seat, check that the seat is properly

attached to the lower anchors and tether anchor. Try to move the child

seat from side to side. Also try to tug the seat forward. Check to see if

the anchors hold the seat in place.

If the safety seat is not anchored properly, the risk of a child

being injured in a crash greatly increases.

2007 07+ Explorer Sport Trac (esp)

Owners Guide (post-2002-fmt)

USA (fus)

Seating and Safety Restraints

158

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 311 312

Pas de commentaire

Ford 2007 Explorer Sport Trac v.1 Manuel d'utilisateur Page 158