Ford 2002 Explorer Manuel d'utilisateur télécharger pdf (Page 18)

Usually, when something affects the compass readings, the compass will

correct itself after a few days of operating your vehicle in normal

conditions. If the compass still appears to be inaccurate, a manual

calibration may be necessary. Refer to Compass calibration

adjustment.

Most geographic areas (zones) have a magnetic north compass point that

varies slightly from the northerly direction on maps. This variation is four

degrees between adjacent zones and will become noticeable as the

vehicle crosses multiple zones. A correct zone setting will eliminate this

error. Refer to Compass zone adjustment.

Compass zone adjustment

1. Determine which magnetic zone

you are in for your geographic

location by referring to the zone

map.

2. Turn ignition to the ON position.

3. Locate compass sensor mounted

at base of mirror.

4. Insert a paperclip into the small

hole on the bottom of the compass

sensor or press the button on the

top of the compass module until

ZONE appears in the instrument cluster display.

5. Release pressure on the paperclip or button and then slowly press it

down again.

6. Continue to press until ZONE

appears in the instrument cluster

display, then release. The display

should show the current zone

number.

7. Press until the desired zone

number appears. The display will flash and then return to normal

operation. The zone is now updated.

123

6 7 8 91011

Instrumentation

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 335 336

Pas de commentaire

Ford 2002 Explorer Manuel d'utilisateur Page 18