Ford 2002 Explorer Manuel d'utilisateur télécharger pdf (Page 119)

Activating the memory seat feature

To activate this feature:

1. Position the seat to the position you desire.

2. Press the SET control on the

driver’s door panel.

3. Within 5 five seconds, press one

control on the remote transmitter

and then press the 1 or 2 control on

the driver’s door panel to which you

would like to associate with the seat

and Driver 1 or Driver 2 positions.

4. Repeat this procedure for another

remote transmitter if desired.

Deactivating the memory seat feature

To deactivate this feature:

1. Press the SET control on the driver’s door panel.

2. Within 5 five seconds, press any control on the remote transmitter

which you would like to deactivate and then press the SET control on

the driver’s door panel.

3. Repeat this procedure for another remote transmitter if desired.

Replacing the battery

The remote transmitter is powered by one coin type three-volt lithium

battery CR2032 or equivalent. Typical operating range will allow you to

be up to 10 meters (33 feet) away from your vehicle. A decrease in

operating range can be caused by the following factors:

• Weather conditions

• Nearby radio towers

• Structures around the vehicle

• Other vehicles parked next to the vehicle

SET

Controls and features

119

1 2 ... 114 115 116 117 118 119 120 121 122 123 124 ... 335 336

Pas de commentaire

Ford 2002 Explorer Manuel d'utilisateur Page 119