Ford 2000 Explorer Manuel d'utilisateur télécharger pdf (Page 23)

Temperature control knob

Controls the temperature of the

airflow inside the vehicle.

Mode selector control

Controls the direction of the airflow

to the inside of the vehicle.

The air conditioning compressor can operate in all modes except

and . However, the air conditioning will only function if the outside

temperature is about 6°C (43°F) or higher.

Since the air conditioner removes considerable moisture from the air

during operation, it is normal if clear water drips on the ground under

the air conditioner drain while the system is working and even after you

have stopped the vehicle.

• MAX A/C-Uses recirculated air to cool the vehicle. MAX A/C is noisier

than A/C but more economical and will cool the inside of the vehicle

faster. Airflow will be from the instrument panel registers. This mode

can also be used to prevent undesirable odors from entering the

vehicle. When placed in MAX A/C, the air conditioning will operate at

a full cool temperature. Therefore, the temperature control becomes

non-functional.

• A/C-Uses outside air to cool the vehicle. It is quieter than MAX A/C

but not as economical. Airflow will be from the instrument panel

registers.

•

(Panel)-Distributes outside air through the instrument panel

registers. However, the air will not be cooled below the outside

temperature because the air conditioning does not operate in this

mode.

• OFF-Outside air is shut out and the fan will not operate. For short

periods of time only, use this mode to prevent undesirable odors from

entering the vehicle.

OFF

A/C

MAX

A/C

Controls and features

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 295 296

Pas de commentaire

Ford 2000 Explorer Manuel d'utilisateur Page 23