Ford 1999 F-150 Manuel d'utilisateur télécharger pdf (Page 184)

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and/or dipstick handle

and also in the Lubricant specifications section in the Capacities and

specifications chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 250 mL (1/2 pint) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause

shift and/or engagement

concerns and/or possible

damage.

Checking and adding manual transmission fluid

1. Clean the filler plug.

2. Remove the filler plug and

inspect the fluid level.

ADD COLD HOT DO NOT ADD

DON’T ADD

Maintenance and care

184

1 2 ... 179 180 181 182 183 184 185 186 187 188 189 ... 231 232

Pas de commentaire

Ford 1999 F-150 Manuel d'utilisateur Page 184