Ford 1999 Explorer Manuel d'utilisateur télécharger pdf (Page 239)

Replacing tail lamp/backup lamp bulbs

The tail lamp/backup lamp bulbs are

located in the same portion of the

tail lamp assembly, one just below

the other. Follow the same steps to

replace either bulb:

1. Open the liftgate to expose the

lamp assemblies.

2. Remove the two screws from the

lamp assembly.

3. Carefully remove the lamp

assembly by pulling it rearward.

4. Twist the bulb socket

⁄

turn counterclockwise and remove from lamp

assembly.

5. Pull the bulb straight out of the socket and push in the new bulb.

6. To complete installation, follow the removal procedure in reverse

order.

Replacing foglamp bulbs

1. Remove the bulb socket from the

foglamp by turning

counterclockwise.

2. Disconnect the electrical

connector from the foglamp bulb.

3. Connect the electrical connector to the new foglamp bulb.

4. Install the bulb socket in the foglamp turning clockwise.

Maintenance and care

239

1 2 ... 234 235 236 237 238 239 240 241 242 243 244 ... 263 264

Pas de commentaire

Ford 1999 Explorer Manuel d'utilisateur Page 239