Ford 1998 Crown Victoria Manuel d'utilisateur télécharger pdf (Page 115)

2. Visually inspect the fluid level.

3. If necessary, add brake fluid until

the level reaches MAX. Do not fill

above this line.

4. Use only a DOT 3 brake fluid

certified to meet Ford specifications.

Refer to Lubricant specifications in the Capacities and specifications

chapter.

Brake fluid is toxic.

If you use a brake fluid that is not DOT 3, you will cause

permanent damage to your brakes.

Do not let the reservoir for the master cylinder run dry. This

may cause the brakes to fail.

WINDSHIELD WASHER FLUID

Checking and adding washer fluid

Check the washer fluid whenever

you stop for fuel. The reservoir is

highlighted with a

symbol.

If the level is low, add enough fluid

to fill the reservoir. In very cold

weather, do not fill the reservoir all

the way.

Do not put engine coolant in the container for the windshield

washer fluid.

MAX

MIN

Maintenance and care

115

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 159 160

Pas de commentaire

Ford 1998 Crown Victoria Manuel d'utilisateur Page 115