Ford 2013 Fusion v.3 Manuel d'utilisateur télécharger pdf (Page 189)

PRINCIPLE OF OPERATION

Cruise control lets you maintain a set

speed without keeping your foot on the

accelerator pedal.

USING CRUISE CONTROL

WARNINGS

Do not use cruise control in heavy

traffic, on winding roads or when the

road surface is slippery.

When you are going downhill, your

speed may increase above the set

speed. The system will not apply the

brakes. Change down a gear to assist the

system in maintaining the set speed.

Note: Cruise control will disengage if the

vehicle speed decreases more than 10 mph

(16 km/h) below your set speed while

driving uphill.

E144500

The cruise controls are located on the

steering wheel.

Switching Cruise Control On

Press and release ON.

E71340

The indicator will appear in the

instrument cluster.

Setting a Speed

1. Accelerate to the desired speed.

2. Press and release SET+.

3. Take your foot off the accelerator

pedal.

The indicator will change colors in the

instrument cluster.

Changing the Set Speed

Note: If you accelerate by pressing the

accelerator pedal, the set speed will not

change. When you release the accelerator

pedal, you will return to the speed that you

previously set.

• Press and hold SET+ or SET-. Release

the control when you reach the desired

speed.

• Press and release SET+ or SET-. The

set speed will change in approximately

1 mph (2 km/h) increments.

• Press the accelerator or brake pedal

until you reach the desired speed. Press

and release SET+.

Canceling the Set Speed

Press CNCL or tap the brake pedal. You

will not erase the set speed.

Resuming the Set Speed

Press and release RES.

Switching Cruise Control Off

Note: You will erase the set speed if you

switch the system off.

Press and release OFF or switch the

ignition off.

186

Fusion/Mondeo (CC7)

Cruise Control

1 2 ... 184 185 186 187 188 189 190 191 192 193 194 ... 457 458

Commentaires sur ces manuels

Pas de commentaire