Ford 2013 Fusion v.3 Manuel d'utilisateur télécharger pdf (Page 164)

E99067

Note: The gearshift lever can only be

moved to R (Reverse) by raising the collar

below the gearshift knob up before shifting

to reverse. This is a lockout feature which

protects the transmission from accidentally

engaging R (Reverse) when intending to

select 1 (First).

If R (Reverse) is not fully engaged, press

the clutch pedal down and return the

gearshift to the neutral position. Release

the clutch pedal for a moment, then raise

the collar and shift to R (Reverse) again.

Parking Your Vehicle

WARNING

Do not park your vehicle in Neutral,

it may move unexpectedly and injure

someone. Use 1 (First) gear and set

the parking brake fully.

To park your vehicle:

1. Apply the brake and shift into the

neutral position.

2. Fully apply the parking brake, hold the

clutch pedal down, then shift into 1

(First).

3. Turn the ignition off.

AUTOMATIC TRANSMISSION

(IF EQUIPPED)

WARNINGS

Always set the parking brake fully

and make sure the gearshift is

latched in P (Park). Turn the ignition

to the off position and remove the key

whenever you leave your vehicle.

Do not apply the brake pedal and

accelerator pedal simultaneously.

Applying both pedals simultaneously

for more than three seconds will limit

engine rpm, which may result in difficulty

maintaining speed in traffic and could lead

to serious injury.

Understanding the Positions of

Your Automatic Transmission

Putting your vehicle in gear:

1. Fully press down the brake pedal.

2. Press and hold the button on the front

of the gearshift lever.

3. Move the gearshift lever into the

desired gear.

4. Release the button and your

transmission will remain in the selected

gear.

P

R

N

D

S

E142628

161

Fusion/Mondeo (CC7)

Transmission

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 457 458

Commentaires sur ces manuels

Pas de commentaire