1. Insert the key you want to program into
the ignition. With a push-button start
(if equipped), put the intelligent access
key in the backup slot. Backup slot
information is located in a different
chapter. See Starting and Stopping
the Engine (page 137).
2. Turn the ignition on.
3. From the main menu within the
information display, press OK or the >
button to navigate through the various
screens. Select Settings and then
MyKey.
4. Press OK or the > button to select
Create.
5. When prompted, hold the OK button
until you see a message informing you
to label this key as a MyKey. The key
will be restricted at your vehicle's next
start.
After the key is successfully programmed,
make sure you label it so you can
distinguish it from the admin keys.
You can also program optional settings for
the key(s). Refer to
Programming/Changing Optional
Settings.
Vehicles equipped with remote start need
to follow a separate procedure. See Using
MyKey With Remote Start Systems
(page 51).
Programming/Changing Optional
Settings
Note: If you keep your ignition in the on
position while you program your MyKeys,
you can clear or change any settings without
needing an admin key to do so. If you turn
the ignition off and then turn it back on, you
will need to use an admin key to clear any
of your MyKey settings. For more
information on clearing keys, see See
Clearing All MyKeys (page 50).
To set your optional MyKey programming
settings:
1. Turn the ignition on using an admin key.
2. Use the information display to navigate
to the MyKey menu. Select Settings,
then MyKey by pressing OK or the >
button.
3. Continue using the arrow buttons to
get to an optional feature.
4. Press OK or > to scroll through the
settings.
5. Press OK or > to make a selection.
CLEARING ALL MYKEYS
You can clear the programming while you
create a restricted MyKey or use an admin
key to clear the restrictions. When you
clear the restrictions, you return the key to
its original admin key status.
To clear your MyKey settings, use the
information display to do the following:
1. Access the main menu and select
Settings, then MyKey.
2. Scroll to Clear All and press the OK
button.
3. Hold the OK button until ALL
MYKEYS CLEARED displays.
50
Esca
e
TM2
MyKey™
(558 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels