Ford 2013 Escape v.4 Manuel d'utilisateur télécharger pdf (Page 176)

PRINCIPLE OF OPERATION

Cruise control lets you maintain a set

speed without keeping your foot on the

accelerator pedal.

USING CRUISE CONTROL

WARNINGS

Do not use cruise control in heavy

traffic, on winding roads or when the

road surface is slippery.

When you are going downhill, your

speed may increase above the set

speed. The system will not apply the

brakes. Change down a gear to assist the

system in maintaining the set speed.

Note: Cruise control will disengage if your

vehicle speed decreases more than 10 mph

(16 km/h) below your set speed while

driving uphill.

(

The cruise controls are located on the

steering wheel.

Switching Cruise Control On

Press and release ON.

(

The indicator will display in the

instrument cluster.

Setting a Speed

1. Accelerate to the desired speed.

2. Press and release SET+.

3. Take your foot off the accelerator

pedal.

Changing the Set Speed

• Press and hold SET+ or SET-. Release

the control when you reach the desired

speed.

• Press and release SET+ or SET-. The

set speed will change in approximately

1 mph (2 km/h) increments.

• Press the accelerator or brake pedal

until you reach the desired speed. Press

and release SET+.

Canceling the Set Speed

Pull CAN toward you and release, or tap

the brake pedal. The set speed will not be

erased.

Resuming the Set Speed

Pull RES toward you and release.

Switching Cruise Control Off

Note: You will erase the set speed if you

switch the system off.

Press and release OFF or switch the

ignition off.

172

Esca

p

e

(

TM2

)

Cruise Control

1 2 ... 171 172 173 174 175 176 177 178 179 180 181 ... 221 222

Commentaires sur ces manuels

Pas de commentaire