Ford 2012 Explorer v.1 Manuel d'utilisateur Page 279

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 439
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 278
To turn off traction control in the AdvanceTrac system, select traction
control off in the message center. Full features of the AdvanceTrac
system can be restored by selecting it on again or by turning off and
restarting the engine.
If you switch off traction control in
the AdvanceTrac with RSC
system, the stability control off light
will illuminate steadily. Selecting
traction control on again will turn
off the stability control off light.
Note: If the system cannot be turned off, refer to MyKey in the Locks
and Security chapter for more information.
Note: In R (Reverse), ABS and the engine traction control and brake
traction control features will continue to function; however, ESC, RSC
and Curve Control are disabled.
Note: Curve Control can be disabled with the terrain management
control (if equipped). See Terrain Management later in this chapter.
AdvanceTrac Features
Operation Mode
Stability
control
light
(
)
Message
center display
TCS
Default at
start-up
System
initialization
Turns on
at
start-up
None Enabled
Selected once
Traction
control off
On
TRACTION
CONTROL OFF
Disabled
Selected again
after deactivation
AdvanceTrac
fully enabled
Off
TRACTION
CONTROL ON
Enabled
Note: The ESC/RSC/Curve Control systems cannot be turned on or
off through the message center.
Trailer sway control
When properly equipped, trailer sway control will use the vehicle’s
AdvanceTrac with RSC system to detect and help reduce trailer sway
by applying brake force at individual wheels and, if necessary, by
reducing engine power. Trailer sway control is only enabled above
40 mph (64 km/h).
OFF
Driving
279
2012 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)
Vue de la page 278
1 2 ... 274 275 276 277 278 279 280 281 282 283 284 ... 438 439

Commentaires sur ces manuels

Pas de commentaire