Ford 2012 Explorer v.1 Manuel d'utilisateur télécharger pdf (Page 115)

100

101

1. To program units with fixed code DIP switches, you will need the

garage door hand-held transmitter, paper and a pen or pencil.

2. Open the battery cover and record the switch settings from left to

right for all 8 to 12 switches. Use the figure below:

When a switch is in the up, on, or + position, circle “L.”

When a switch is in the middle, neutral, or 0 position, circle “M.”

When a switch is in the down, off, or – position, circle “R.”

Switch

position 12345678 9101112

Up, on

or +

LLLLLLLLLLLL

Middle,

neutral

or 0

MMMMMMMMMMMM

Down,

offor–

RRRRRRRRRRRR

L=left; M=middle; R=right

3. To input these positions into the

Car2U威 system, simultaneously

press all three Car2U威 system

buttons for a few seconds and then

release to put the device into

programming mode. The indicator

lights will blink slowly. Within

2.5 minutes enter your

corresponding DIP switch settings

from left to right into your Car2U威 system by pressing and releasing the

buttons corresponding to the settings you circled.

4. After inputting switch settings, simultaneously press and release all

three Car2U威 system buttons. The indicator lights will turn on.

Driver Controls

115

2012 Explorer (exp)

Owners Guide, 1st Printing

USA (fus)

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 438 439

Commentaires sur ces manuels

Pas de commentaire

Ford 2012 Explorer v.1 Manuel d'utilisateur Page 115

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2012 Explorer v.1