Ford 2011 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 54)

Disengaging speed control

To disengage the speed control, press the brake pedal or the clutch

pedal (if equipped). Disengaging the speed control will not erase the

previous set speed.

Note: When you use the clutch pedal to disengage the speed control,

the engine speed may briefly increase, this is normal.

Resuming a set speed

Press and release RES. This will automatically return the vehicle to the

previously set speed.

Increasing speed while using speed control

To set a higher speed:

• Press and hold SET+ until you get to the desired speed, then release

the control. You can also use SET+ to operate the tap-up function.

Press and release SET+ to increase the set speed in 1 mph (1.6 km/h)

increments.

• Use the accelerator pedal to get to the desired speed. When the

vehicle reaches that speed, press and release SET +.

Reducing speed while using speed control

To reduce a set speed:

• Press and hold CST- until you get to the desired speed, then release

the control. You can also use CST- to operate the tap-down function.

Press and release the CST- to decrease the set speed in 1 mph

(1.6 km/h) increments.

• Press the brake pedal or the clutch pedal (if equipped) until the

desired vehicle speed is reached, then press and release SET+.

Turning off speed control

To turn off the speed control, press OFF or turn off the ignition.

Note: When you turn off the speed control or the ignition, your speed

control set speed memory is erased.

Driver Controls

2011 Ranger (ran)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 302 303

Pas de commentaire

Ford 2011 Ranger v.2 Manuel d'utilisateur Page 54