Ford 2011 Ranger v.2 Manuel d'utilisateur télécharger pdf (Page 158)

Parking brake

Apply the parking brake whenever

the vehicle is parked. To set the

parking brake, press the parking

brake pedal down until the pedal

stops.

The BRAKE warning lamp in the

instrument cluster illuminates and

remains illuminated (when the

ignition is turned on) until the

parking brake is released.

WARNING: Always set the parking brake fully and make sure

that the gearshift is securely latched in P (Park) (automatic

transmission) or in 1 (First) (manual transmission).

Note: The parking brake is not recommended to stop a moving vehicle.

However, if the normal brakes fail, the parking brake can be used to stop

your vehicle in an emergency. Since the parking brake applies only the

rear brakes, the vehicle’s stopping distance will increase greatly and the

handling of your vehicle will be adversely affected.

Pull the release lever to release the

brake.

Driving with the parking brake

on will cause the brakes to wear

out quickly and reduce fuel

economy.

BRAKE

Driving

158

2011 Ranger (ran)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 153 154 155 156 157 158 159 160 161 162 163 ... 302 303

Pas de commentaire

Ford 2011 Ranger v.2 Manuel d'utilisateur Page 158