Ford 2009 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 94)

100

101

• (4) Horizontal reference line

2. Measure the height from the

center of your headlamp (indicated

by a 3.0 mm circle on the lens) to

the ground and mark an 8 foot

(2.4 meter) horizontal reference line

on the vertical wall or screen at this

height (a piece of masking tape

works well).

3. Turn on the low beam headlamps

to illuminate the wall or screen and open the hood. Cover one of the

headlamps so no light from that lamp hits the wall.

4. On the wall or screen you will

observe a light pattern with a

distinct horizontal edge towards the

right. If this edge is not at the

horizontal reference line, the beam will need to be adjusted so the edge

is at the same height as the horizontal reference line.

5. Locate the vertical adjuster on

each headlamp, then use a E5 Torx

socket to turn the adjuster either

counterclockwise (to adjust down)

or clockwise (to adjust up) aligning

the upper edge of the light pattern

up to the horizontal line.

6. Repeat Steps 3–5 for the other

headlamp.

7. Close the hood and turn off the

lamps.

TURN SIGNAL CONTROL

• Push down to activate the left

turn signal.

• Push up to activate the right turn

signal.

2009 F-250/350/450/550 (f23)

Owners Guide, 2nd Printing

USA (fus)

Lights

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 418 419

Commentaires sur ces manuels

Pas de commentaire

Ford 2009 F-550 v.2 Manuel d'utilisateur Page 94

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2009 F-550 v.2