Ford 2009 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 289)

To start the vehicle:

1. Make sure the parking brake is fully set.

2. Press the clutch pedal to the floor, then put the gearshift lever in the

neutral position.

3. Start the engine.

4. Press the brake pedal and move the gearshift lever to the desired

gear; 1 (First) or R (Reverse).

5. Release the parking brake, then slowly release the clutch pedal while

slowly pressing on the accelerator.

During each shift, the clutch pedal must be fully depressed to the floor.

Make sure the floor mat is properly positioned so it doesn’t interfere with

the full extension of the clutch pedal.

Failure to fully depress the clutch pedal to the floor may cause

increased shift efforts, prematurely wear transmission

components or damage the transmission.

Do not drive with your foot resting on the clutch pedal or use the

clutch pedal to hold your vehicle at a standstill while waiting on a

hill. These actions will severely reduce the life of the clutch and

could nullify a clutch warranty claim.

Recommended shift speeds

Do not overspeed the engine when going downhill or steep grades. If

equipped, use the tachometer and do not allow engine speed to exceed

the redline area. Operating the engine beyond the recommended speeds

can cause severe engine damage.

Shift according to the following shift speed charts:

Upshifts when accelerating (recommended for best fuel

economy)

6-speed transmission

Shift from: Transfer case position

(if equipped)

2H or 4H 4L

LO-1 5 mph (8 km/h) 2 mph (3 km/h)

1-2 14 mph (23 km/h) 6 mph (10 km/h)

2-3 22 mph (35 km/h) 9 mph (14 km/h)

3-4 30 mph (48 km/h) 12 mph (19 km/h)

(Overdrive)

40 mph (64 km/h) 15 mph (24 km/h)

2009 F-250/350/450/550 (f23)

Owners Guide, 2nd Printing

USA (fus)

Driving

289

1 2 ... 284 285 286 287 288 289 290 291 292 293 294 ... 418 419

Pas de commentaire

Ford 2009 F-550 v.2 Manuel d'utilisateur Page 289