Ford 2009 F-550 v.2 Manuel d'utilisateur Page 297

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 419
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 296
uses auto-manual hub locks that can be engaged and disengaged
automatically based on the 4x4 mode selected.
auto-manual hub locks can be
manually overridden by rotating
the hub lock control from AUTO
to LOCK if desired.
automatic operation of the
hub locks is recommended, and
will increase fuel economy
For proper operation, make
sure that each hub is fully
engaged and that both hub
locks are set to the same position (both set to LOCK or both
set to AUTO). To engage LOCK, turn the hub locks completely
clockwise; to engage AUTO, turn the hub locks completely
counterclockwise.
4WD system indicator lights
The 4WD system indicator lights illuminate only under the following
conditions. If these lights illuminate when driving in 2WD, contact your
authorized dealer as soon as possible.
4x4 HIGH - momentarily
illuminates after the engine is
started. Illuminates when 4H (4x4
High) is engaged. Flashes when
shifting into or out of 4H (4x4 high) (ESOF systems only).
4x4 LOW momentarily
illuminates when the ignition is
turned to the ON position.
Illuminates when 4L (4x4 Low) is
engaged. Flashes when shifting into or out of 4L (4x4 Low) or if the
range shift conditions are not met (ESOF systems only).
Using a Manual Shift On Stop (MSOS) 4x4 system (if equipped)
Note: High shift efforts may be encountered when attempting to
shift into and out of 4x4 modes. It is recommended to allow the
vehicle to roll at a speed below 5 mph (8 km/h) when shifting.
Note: Some noise may be heard as the 4x4 system shifts or engages.
This is normal. In order to reduce engagement noise, it is recommended
that all shifts be performed at speeds below 5 mph (8 km/h).
4x4
HIGH
4x4
LOW
2009 F-250/350/450/550 (f23)
Owners Guide, 2nd Printing
USA (fus)
Driving
297
Vue de la page 296
1 2 ... 292 293 294 295 296 297 298 299 300 301 302 ... 418 419

Commentaires sur ces manuels

Pas de commentaire