Ford 2005 F-150 v.3 Manuel d'utilisateur télécharger pdf (Page 88)

Memory feature (if equipped)

The remote entry system can also control the memory feature.

Press the

control once to unlock the driver’s door. Pressing the

control will automatically move the seat and adjustable pedals to the

desired memory position (the memory position corresponds to the

transmitter being used).

Activating the memory feature

To activate this feature:

1. Position the seat and adjustable pedals to the positions you desire.

2. Press the SET control on the

driver’s seat.

3. Within 5 five seconds, press one

control on the remote transmitter

and then press the 1 or 2 control on

the driver’s door panel to which you

would like to associate with Driver 1

or Driver 2 positions.

4. Repeat this procedure for another

remote transmitter if desired.

Deactivating the memory feature

To deactivate this feature:

1. Press the SET control on the driver’s door seat.

2. Within 5 five seconds, press any control on the remote transmitter

which you would like to deactivate and then press the SET control on

the driver’s door panel.

3. Repeat this procedure for another remote transmitter if desired.

Replacing the battery

The remote entry transmitter uses one coin type three-volt lithium

battery CR2032 or equivalent.

SET

2005 F150 (f12)

Owners Guide (post-2002-fmt)

USA_English (fus)

Locks and Security

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 311 312

Pas de commentaire

Ford 2005 F-150 v.3 Manuel d'utilisateur Page 88