Ford 2005 F-150 v.3 Manuel d'utilisateur télécharger pdf (Page 160)

8. Remove the lug nuts with the lug wrench.

9. Replace the flat tire with the spare tire, making sure the valve stem is

facing outward. Reinstall the lug nuts until the wheel is snug against the

hub. Do not fully tighten the lug nuts until the wheel has been lowered.

10. Lower the wheel by turning the jack handle counterclockwise.

11. Remove the jack and fully

tighten the lug nuts in the order

shown (Refer to Wheel lug nut

torque specifications later in this

chapter for the proper lug nut

torque specification):

• Six lug nut wheel

• Seven lug nut wheel

12. Stow the flat tire. Refer to Stowing the flat/spare tire.

13. Stow the jack and lug wrench. Make sure the jack is fastened so it

does not rattle when you drive.

14. Unblock the wheels.

Stowing the flat/spare tire

Note: Failure to follow spare tire stowage instructions may result in

failure of cable or loss of spare tire.

1. Lay the tire on the ground with the valve stem facing in the direction

specified on the Tire Changing Instructions located with the jack

hardware.

2. Slide the wheel partially under the vehicle and install the retainer

through the wheel center. Pull on the cable to align the components at

the end of the cable.

2005 F150 (f12)

Owners Guide (post-2002-fmt)

USA_English (fus)

Tires, Wheels and Loading

160

1 2 ... 155 156 157 158 159 160 161 162 163 164 165 ... 311 312

Pas de commentaire

Ford 2005 F-150 v.3 Manuel d'utilisateur Page 160