Ford 2005 F-150 v.3 Manuel d'utilisateur télécharger pdf (Page 284)

You can check the fluid without driving if the ambient temperature is

above 50°F (10°C). However, if fluid is added at this time, an overfill

condition could result when the vehicle reaches normal operating

temperature.

The transmission fluid should be in

this range if at normal operating

temperature (150°F-170°F

[66°C-77°C]).

The transmission fluid should be in

this range if at ambient temperature

(50°F-95°F [10°C-35°C]).

High fluid level

Fluid levels above the safe range

may result in transmission failure.

An overfill condition of transmission

fluid may cause shift and/or

engagement concerns and/or

possible damage.

High fluid levels can be caused by an overheating condition.

Adjusting automatic transmission fluid levels

Before adding any fluid, make sure the correct type is used. The type of

fluid used is normally indicated on the dipstick and also in the

Lubricant specifications section in this chapter.

Use of a non-approved automatic transmission fluid may cause

internal transmission component damage.

If necessary, add fluid in 1/2 pint (250 ml) increments through the filler

tube until the level is correct.

If an overfill occurs, excess fluid

should be removed by a qualified

technician.

An overfill condition of

transmission fluid may cause

shift and/or engagement concerns and/or possible damage.

2005 F150 (f12)

Owners Guide (post-2002-fmt)

USA_English (fus)

Maintenance and Specifications

284

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 311 312

Pas de commentaire

Ford 2005 F-150 v.3 Manuel d'utilisateur Page 284