Ford 2003 E-550 v.1 Manuel d'utilisateur télécharger pdf (Page 203)

engine must warm up to its normal operating temperature. Once started,

do not turn off the engine until the above driving cycle is complete.

CHECKING AND ADDING POWER STEERING FLUID

Check the power steering fluid.

Refer to the scheduled maintenance

guide for the service interval

schedules. If adding fluid is

necessary, use only MERCON威 ATF.

Check the fluid level when it is at ambient temperature, 20°–80° F (-7°

– 25° C):

1. Check the fluid level on the dipstick. It should be between the arrows

in the FULL COLD range. Do not add fluid if the level is within this

range.

2. If the fluid level is low, start the engine.

3. While the engine idles, turn the steering wheel left and right several

times.

4. Turn the engine off.

For E-450 and E-550 vehicles with the Hydro-Boost Brake

System, do not press the brake pedal after the engine has been

turned off.

5. Recheck the fluid level on the dipstick. Do not add fluid if the level is

between the arrows in the FULL COLD range.

FULL COLD

Maintenance and Specifications

203

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 231 232

Pas de commentaire

Ford 2003 E-550 v.1 Manuel d'utilisateur Page 203