Ford 2003 E-550 v.1 Manuel d'utilisateur télécharger pdf (Page 153)

3. Use the lug nut wrench to screw the lug nut snugly against the wheel.

4. Lower the vehicle by turning the jack handle counterclockwise.

5. Remove the jack and fully tighten the lug nuts in the following

pattern:

• 5-lug wheel

• 8-lug wheel

Never use wheels or lug

nuts different than the

original equipment as this could

damage the wheel or mounting

system. This damage could allow

the wheels to come off while the

vehicle is being driven.

6. Install any wheel covers, ornaments or hub caps. Make sure they are

screwed or snapped in place.

7. Stow the jack, handle and lug wrench.

8. Unblock the wheels.

On vehicles equipped with single rear wheels, retighten the lug nuts to

the specified torque at 800 km (500 miles) of operation after any wheel

change or any time the lug nuts are loosened.

On vehicles equipped with dual rear wheels, retighten the wheel lug nuts

to the specified torque at 160 km (100 miles), and again at 800 km

(500 miles) of new vehicle operation.

Roadside Emergencies

153

1 2 ... 148 149 150 151 152 153 154 155 156 157 158 ... 231 232

Pas de commentaire

Ford 2003 E-550 v.1 Manuel d'utilisateur Page 153