Ford 2002 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 152)

Shifting from 4x4 HIGH (4WD High) to 2WD (2WD High)

Rotate the 4WD control to 2WD at

any forward speed. Disengagement

of the transfer case and front hubs

may be delayed due to torque bind

which is caused by driving on dry

hard surfaces or performing tight

turns while using the 4WD system.

• You do not need to operate the vehicle in R (Reverse) to disengage

your front hubs, but it will eliminate any torque bind and allow the

system to immediately disengage.

Shifting from 4x4 HIGH (4WD High) to 4x4 LOW (4WD Low)

1. Bring the vehicle to a complete stop.

2. Depress the brake.

3. Place the gearshift in N (Neutral) (automatic transmission) or depress

the clutch (manual transmission).

4. Move the 4WD control to the 4x4

LOW position.

5. Hold the shift conditions until the

LOW RANGE indicator light

illuminates.

6. If the LOW RANGE indicator light

does not illuminate within 15

seconds, drive the vehicle above

8 km/h (5 mph), then repeat steps 1

through 5 before reporting any shift

concerns to your dealer.

Shifting from 4x4 LOW (4WD Low) to 4x4 HIGH (4WD High) or 2WD

(2WD High)

1. Bring the vehicle to a complete stop.

2. Depress the brake.

3. Place the gearshift in N (Neutral) (automatic transmission) or depress

the clutch (manual transmission).

4X4

HIGH

2WD

4X4

LOW

2WD

4X4

LOW

4X4

HIGH

Driving

152

1 2 ... 147 148 149 150 151 152 153 154 155 156 157 ... 303 304

Commentaires sur ces manuels

Pas de commentaire

Ford 2002 F-550 v.2 Manuel d'utilisateur Page 152

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2002 F-550 v.2