Ford 2002 F-550 v.2 Manuel d'utilisateur télécharger pdf (Page 124)

Tether anchorage hardware kits (part number 613D74) including

instructions, may be obtained at no charge from any Ford or

Lincoln/Mercury dealer.

If you have a Super Cab or Crew Cab, Ford recommends you attach

tether safety seats in the rear seating position (if possible) with the

tether strap attached to the tether anchorage bracket as shown in the

instructions provided with the tether anchor kit.

Tighten the anchor according to specifications. Otherwise, the

safety seat may not be properly secured and the child may be

injured in a sudden stop or collision.

Attaching child safety seats with tether straps

Most new forward-facing child safety seats include a tether strap which

goes over the back of the seat and hooks to an anchoring point. Tether

straps are available as an accessory for many older safety seats. Contact

the manufacturer of your child seat for information about ordering a

tether strap.

The passenger seats of your vehicle may be equipped with built-in tether

strap anchors located behind the seats as described below.

The tether anchors in your vehicle may be straps on the seatback or an

anchor bracket on the rear edge of the seat cushion or an anchor bracket

mounted to the body shell on the back panel.

The SuperCab rear seat has three straps behind the top of the seat back

that function as both routing loops for the tether straps and anchor loops.

The tether strap anchors in your vehicle are in the following positions

(shown from top view):

Attach the tether strap only to the appropriate tether anchor as

shown. The tether strap may not work properly if attached

somewhere other than the correct tether anchor.

• F—Series Regular Cab

Seating and Safety Restraints

124

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 303 304

Pas de commentaire

Ford 2002 F-550 v.2 Manuel d'utilisateur Page 124