Ford 2002 F-550 v.1 Manuel d'utilisateur télécharger pdf (Page 157)

The reverse sensing system is

automatically enabled when the gear

selector is placed in R (Reverse)

and the ignition is ON. A reverse

sensing control allows the driver to

disable the reverse sensing system only when the ignition is ON, and the

gear selector is in R (Reverse).

The OFF indicator remains illuminated when the system is disabled. The

system defaults to ON every time the reverse gear is selected. Press the

control to disable or enable the system.

The indicator will remain illuminated to indicate a failure of the reverse

sensing system.

The reverse sensing system may have reduced performance or an

increased chance of false detection if the tailgate is not locked in the

vertical position. When the tailgate is down, the driver may experience a

continuous or intermittent tone. This also applies if items being hauled in

the box do not fit entirely inside and protrude rearward.

Always keep the sensors (located on the rear bumper/fascia) free

from dirt, snow and ice (do not clean the sensors with sharp

objects). These elements may cause the system to operate

inaccurately.

If the vehicle sustains damage to the rear bumper/fascia, leaving

it misaligned or bent, the sensing zone may be altered causing

inaccurate measurement of obstacles or false alarms.

FOUR-WHEEL DRIVE (4WD) OPERATION (IF EQUIPPED)

For important information regarding safe operation of this type

of vehicle, see Preparing to drive your vehicle in this chapter.

When four–wheel drive (4WD) is engaged, power is supplied to all four

wheels through a transfer case. 4WD power can be selected when

additional driving power is desired.

OFF

Driving

157

1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 319 320

Pas de commentaire

Ford 2002 F-550 v.1 Manuel d'utilisateur Page 157