Ford f150 Manuel d'utilisateur télécharger pdf (Page 254)

E142465

6. For vehicles with HID headlamps:

there is a distinct cut-off (change from

light to dark) in the left portion of the

beam pattern. Position the top edge of

this cut-off 2 inches (5 centimeters)

below the horizontal reference line.

E167359

7. Locate the vertical adjuster on each

headlamp. Use a Phillips #2

screwdriver to turn the adjuster either

clockwise or counterclockwise to

adjust the vertical aim of the

headlamp. The horizontal edge of the

brighter light should touch the

horizontal reference line.

8. Repeat Steps 3 through 7 to adjust the

other headlamp.

9. Close the hood and turn off the lamps.

Horizontal Aim Adjustment

Horizontal aim is not required for this

vehicle and is not adjustable.

REMOVING A HEADLAMP

WARNING

Handle a halogen headlamp bulb

carefully and keep out of children’s

reach. Grasp the bulb only by its

plastic base and do not touch the glass.

The oil from your hand could cause the

bulb to break the next time the headlamps

are operated.

Note: If the bulb is accidentally touched,

clean it with rubbing alcohol before

installing it.

Note: This procedure is for replacing the

headlamps, park lamps, turn lamps or side

marker lamps.

Replacing Halogen Headlamp

Bulbs (If Equipped)

1. Make sure the headlamp control is in

the off position and open the hood.

E167360

2. Remove the pushpin that holds the air

deflector or protective cover to the

upper inboard corner of the lamp.

252

F150 (TF6)

Maintenance

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 468 469

Commentaires sur ces manuels

Pas de commentaire