Ford f150 Manuel d'utilisateur télécharger pdf (Page 253)

Headlamp Aiming Target

E142592

8 feet (2.4 meters)A

Center height of lamp to groundB

25 feet (7.6 meters)C

Horizontal reference lineD

Vertical Aim Adjustment

1. Park the vehicle directly in front of a

wall or screen on a level surface,

approximately 25 feet (7.6 meters)

away.

2. Measure the height from the center of

your headlamp (indicated by a 3.0

millimeter circle on the lens) to the

ground and mark an 8 foot (2.4 meter)

horizontal reference line on the vertical

wall or screen at this height (a piece of

masking tape works well).

Note: To see a clearer light pattern for

adjusting, you may want to block the light

from one headlamp while adjusting the

other.

3. Turn on the low beam headlamps to

illuminate the wall or screen and open

the hood. Cover one of the headlamps

so no light hits the wall.

E167358

4. For vehicles with halogen

headlamps: on the wall or screen you

will observe a light pattern with a

distinct horizontal edge toward the

right. If this edge is not at the horizontal

reference line, you will need to adjust

the beam so the edge is at the same

height as the horizontal reference line.

E163806

5. Locate the vertical adjuster on each

headlamp. Use a #2 Phillips

screwdriver to turn the adjuster either

counterclockwise or clockwise in order

to adjust the vertical aim of the

headlamp.

251

F150 (TF6)

Maintenance

1 2 ... 248 249 250 251 252 253 254 255 256 257 258 ... 468 469

Commentaires sur ces manuels

Pas de commentaire