Ford f150 Manuel d'utilisateur télécharger pdf (Page 64)

USING POWER RUNNING

BOARDS

WARNINGS

In extreme climates, excessive ice

buildup may occur, causing the

running boards not to deploy. Make

sure that the running boards have

deployed, and have finished moving before

attempting to step on them. The running

boards will resume normal function once

the blockage is cleared.

Turn off the running boards before

jacking or placing any object under

your vehicle. Never place your hand

between the extended running board and

your vehicle. A moving running board may

cause injury.

Note: Do not use the running boards, front

and rear hinge assemblies, running board

motors, or the running board underbody

mounts to lift your vehicle when jacking.

Always use proper jacking points.

Note: The running boards may operate

more slowly in cool temperatures.

Note: The running board mechanism may

trap debris such as mud, dirt, snow, ice and

salt. This may cause unwanted noise. If this

happens, manually set the running boards

to the deployed position. Then, wash the

system, in particular the front and rear hinge

arms, with a high-pressure car wash wand.

Automatic Power Deploy

E166682

The running boards automatically extend

down and out when you open the door.

This can help you enter and exit your

vehicle.

Automatic Power Stow

When you close the doors, the running

boards return to the stowed position after

a two-second delay.

Manual Power Deploy

You can manually operate the running

boards in the information display. See

General Information (page 86).

Set the running boards in the deployed

position (OUT) to access the roof.

The running boards return to the stowed

position and enter automatic mode when

the vehicle speed exceeds 5 mph (8 km/h).

Enabling and Disabling

You can enable and disable the power

running board feature in the information

display. See General Information (page

86).

62

F150 (TF6)

Power Running Boards (If Equipped)

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 468 469

Commentaires sur ces manuels

Pas de commentaire