Ford 2014 Fusion Hybrid v.1 Manuel d'utilisateur télécharger pdf (Page 194)

A message displays if something obstructs

the radar signals from the sensor. The

sensor is located behind a fascia cover

near the driver side of the lower grille. The

system cannot detect a vehicle ahead and

will not function when something obstructs

the radar signals. The following table lists

possible causes and actions for this

message displaying.

ActionCause

Clean the grille surface in front of the radar

or remove the object causing the obstruc-

tion.

The surface of the radar in the grille is dirty

or obstructed in some way.

Wait a short time. It may take several

minutes for the radar to detect that it is no

longer obstructed.

The surface of the radar in the grille is clean

but the message remains in the display.

Do not use the system in these conditions

because it may not detect any vehicles

ahead.

Heavy rain or snow is interfering with the

radar signals.

Do not use the system in these conditions

because it may not detect any vehicles

ahead.

Swirling water, or snow or ice on the surface

of the road may interfere with the radar

signals.

Wait a short time or switch to normal cruise

control.

You are in a desert or remote area with no

other vehicles and no roadside objects.

Due to the nature of radar technology, it is

possible to get a blockage warning and not

be blocked. This can happen, for example,

when driving in sparse rural or desert

environments. A false blocked condition

will either self clear or clear after a key

cycle.

Switching to Normal Cruise

Control

WARNING

Normal cruise control will not brake

due to slower vehicles. Always be

aware of which mode is selected and

apply the brakes when necessary.

You can manually change from adaptive

cruise control to normal cruise control

through the information display.

E71340

The cruise control indicator light

replaces the adaptive cruise

control indicator light if you

select normal cruise control. The gap

setting will not display, the system will not

automatically respond to lead vehicles and

automatic braking will activate. The

system defaults to adaptive cruise control

when you start the vehicle.

ECO Cruise Control

This feature saves vehicle energy by

relaxing acceleration compared to

standard cruise control. For example, your

vehicle may temporarily lose speed when

going uphill. ECO will appear in the

information display when you activate ECO

cruise control. It can be switched on or off

in the information display. See General

Information (page 86).

191

Cruise Control

1 2 ... 189 190 191 192 193 194 195 196 197 198 199 ... 472 473

Commentaires sur ces manuels

Pas de commentaire