Ford 2014 Escape v.2 Manuel d'utilisateur télécharger pdf (Page 64)

Setting the Liftgate Open Height

1. Open the liftgate.

2. Manually move the liftgate to the

desired height.

3. Press and hold the control button on

the liftgate until you hear a chime,

indicating programming is complete.

Note: You cannot program the height if the

liftgate position is too low.

The new open liftgate height will now be

recalled when the power liftgate is opened.

To change the programmed height, repeat

the above procedure. Once you open the

power liftgate, you can manually move it

to a different height.

When operating the power liftgate after

you have programmed a lower height than

full-open, you can fully open the liftgate

by manually pushing it upward to the

maximum open position.

Obstacle Detection

When Closing

The system stops when it detects an

obstacle and two short tones sound. Once

you remove the obstacle, you can power

close the liftgate.

Note: Entering your vehicle while the

liftgate is closing can cause your vehicle to

bounce and activate obstacle detection. To

prevent this, let the power liftgate close

completely before you enter your vehicle.

Before driving off, check the instrument

cluster for a liftgate or door ajar message or

warning indicator. Failure to do this could

result in unintentionally leaving the liftgate

open while driving.

When Opening

The system stops when it detects an

obstacle and two short tones sound.

Remove the obstacle to operate the

liftgate.

KEYLESS ENTRY (IF EQUIPPED)

SECURICODE™ KEYLESS ENTRY

KEYPAD

The keypad is located near the driver

window. It is invisible until touched and

then it lights up so you can see and touch

the appropriate buttons.

Note: If you enter your entry code too fast

on the keypad, the unlock function may not

work. Re-enter your entry code more slowly.

E138637

You can use the keypad to:

• lock or unlock the doors

• program and erase user codes

• arm and disarm the anti-theft alarm.

You can operate the keypad with the

factory-set five-digit entry code. The code

is located on the owner’s wallet card in the

glove box and is available from an

authorized dealer. You can also create up

to five of your own five-digit personal entry

codes.

Programming a Personal Entry Code

To create your own personal entry code:

1. Enter the factory-set code.

61

Escape/Kuga (TM2)

Locks

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 429 430

Commentaires sur ces manuels

Pas de commentaire