Ford 2013 Taurus v.2 Manuel d'utilisateur télécharger pdf (Page 91)

100

101

4. Turn the ignition on.

5. Turn the ignition off.

6. Turn the lighting control to the autolamp position. The headlamps and

parking lamps will turn on.

7. Turn the lighting control to the off position when the desired delay

time has been reached. The headlamps and parking lamps will turn off.

You can set the headlamp exit delay to one of the following settings:

• Off

• 10 seconds

• 20 seconds

• 30 seconds

• 60 seconds

• 90 seconds

• 120 seconds

• 180 seconds

Note: You can also adjust the time delay using the display controls in

the instrument cluster. See the Information Displays chapter.

DAYTIME RUNNING LAMPS (IF EQUIPPED)

WARNING: Always remember to turn on your headlamps at

dusk or during inclement weather. The Daytime Running Lamp

(DRL) system does not activate the tail lamps and generally may not

provide adequate lighting during these conditions. Failure to activate

your headlamps under these conditions may result in a collision.

The system turns the headlamps on with a reduced output.

To activate:

• the ignition must be in the on position and

• the lighting control is in the off, autolamp, or parking lamp position.

• the transmission is not in P (Park).

AUTOMATIC HIGH BEAM CONTROL (IF EQUIPPED)

The system will automatically turn on your high beams if it is dark

enough and no other traffic is present. When it detects an approaching

vehicle’s headlights, a preceding vehicle’s tail lamps or street lighting, the

system will turn off the high beams (low beams remain on) before they

distract other drivers.

Lighting 91

2013 Taurus

Owners Guide gf, 2nd Printing

USA (fus)

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 540 541

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Taurus v.2 Manuel d'utilisateur Page 91

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Taurus v.2