Ford 2013 Focus Electric Manuel d'utilisateur Page 304

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 386
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 303
Connecting the Jumper Cables
Note: In the illustration, the vehicle on the bottom is used to designate
the assisting (boosting) battery.
1. Connect the positive (+) jumper
cable to the positive (+) terminal of
the discharged battery.
2. Connect the other end of the
positive (+) cable to the positive
(+) terminal of the assisting battery.
3. Connect the negative (-) cable to
the negative (-) terminal of the
assisting battery.
4. Make the final connection of the
negative (-) cable to an exposed
metal part of the stalled vehicle’s
engine or motor.
WARNING: Do not connect the end of the second cable to the
negative (-) terminal of the battery to be jumped. A spark may
cause an explosion of the gases that surround the battery or a surge of
the battery.
Jump Starting
1. Start the engine of the booster vehicle and run the engine at
moderately increased speed.
2. Switch on the disabled vehicle to Ready to Drive mode.
3. Once the disabled vehicle has been started, keep both vehicles
running for an additional three minutes before disconnecting the jumper
cables.
+
+
2
3
1
4
304 Roadside Emergencies
2013 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing
USA (fus)
Vue de la page 303
1 2 ... 299 300 301 302 303 304 305 306 307 308 309 ... 385 386

Commentaires sur ces manuels

Pas de commentaire

Escient DVD přehrávače uživatelské příručky

Začínající na F

Klepnutím na abecedu níže přejděte na úplný seznam modelů začínajících tímto písmenem

Modely Typ Dokumentu
FireBall DVDM-100
Uživatelský manuál   DVDM-100 QuickSetup, 2 stránky
Fireball DVDM-552
Uživatelský manuál   DVDM-552 QuickSetup, 2 stránky
Uživatelský manuál   Escient Fireball DVDM-552 User`s manual [en] , 125 stránky