Ford 2013 Focus Electric Manuel d'utilisateur Page 157

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 386
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 156
privileges. When you restart the vehicle, the vehicle will identify the user
as an admin or MyKey driver depending on the settings of the actual key
used to start the vehicle.
Note: For all vehicles, the number of MYKEY(S) PROGRAMMED or
ADMIN KEYS PROGRAMMED that is displayed in the MyKey system
status menus may include the non-Ford-approved remote start system as
an additional key in the total count. See the Checking system status
section.
For all vehicles with a non-Ford-approved remote start installed, it is
possible to program all “real” keys as MyKeys, in which case, you will
need to use your remote start system to clear all MyKeys (which
removes all restrictions and returns them to admin key status) by doing
the following:
1. Enter the vehicle and close all doors.
2. Remote start the vehicle using your non-Ford-approved remote start
fob.
3. Follow Steps 1-3 in the Clearing all keys section.
MyKey Troubleshooting
Condition Potential Causes
I cannot program a
key
The key does not have admin privileges.
The key is the only admin key (there always
has to be at least one admin key).
The intelligent access key is not held close
enough to the steering column.
SecuriLock passive anti-theft system is
disabled or in unlimited mode.
The vehicle has been started using a remote
start system that is not programmed with
admin privileges. Refer to Using MyKey with
remote start systems.
I cannot program the
optional settings
The key does not have admin privileges.
No keys are programmed to the vehicle.
Refer to Creating a MyKey.
The vehicle has been started using a remote
start system that is not programmed with
admin privileges. Refer to Using MyKey with
remote start systems.
Locks and Security 157
2013 Focus Electric Vehicle (fob)
Owners Guide gf, 1st Printing
USA (fus)
Vue de la page 156
1 2 ... 152 153 154 155 156 157 158 159 160 161 162 ... 385 386

Commentaires sur ces manuels

Pas de commentaire