Ford 2013 Focus Electric Manuel d'utilisateur télécharger pdf (Page 125)

Switching Mono Mode Back On

Press and hold the AUTO button. The passenger’s side temperature is

adjusted to the driver’s side temperature setting.

Operating Tips

• To reduce fog build-up on the windshield during humid

weather, select defrost.

• To reduce humidity build-up inside the vehicle, avoid driving with the

system switched off unless a window can be opened to help circulate

fresh air.

• Do not put objects under the front seats that will interfere with the

airflow to the back seats.

• Remove any snow, ice or leaves from the air intake area at the base of

the windshield.

• To improve the A/C cool down, drive with the windows open for

approximately 2–3 minutes after starting the vehicle or until the

vehicle has “aired out.”

• The A/C system is used to cool both the interior of the vehicle and the

high voltage battery. In hot outside temperatures, interior cooling may

be temporarily reduced if the high voltage battery requires cooling.

Keep the vehicle plugged in (when possible) to allow automatic

battery cooling in high temperature conditions.

• Interior heating is done by an electrical heater. Set the fan at a lower

speed to get a warmer outlet temperature on cold days.

• A small amount of air may be felt from the floor vent regardless of the

air distribution setting that is selected.

Maximum Cooling Performance

1. Press MAX A/C. The system defaults to single zone operation and the

coldest temperature setting. LO appears in the display.

2. A/C,

and will be selected.

3. Fan speed will be increased to the highest speed, but can be adjusted

as desired.

Climate Control 125

2013 Focus Electric Vehicle (fob)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 385 386

Pas de commentaire

Ford 2013 Focus Electric Manuel d'utilisateur Page 125