Ford 2013 Explorer v.1 Manuel d'utilisateur télécharger pdf (Page 347)

100

101

Replacing fog lamp bulbs

1. Make sure the headlamp switch is off.

1. Make sure that the fog lamp switch

is in the off position.

2. Remove the bulb socket from the

fog lamp by turning it

counterclockwise.

3. Disconnect the electrical connector.

Reverse steps to reinstall bulb(s).

Replacing turn/backup lamp bulbs

The turn/backup lamp bulbs are located in the same area of the tail lamp

assembly, one below the other. Follow the same steps to replace these

bulbs:

1. Make sure the headlamp switch is in the off

position, then open the liftgate to expose the lamp

assembly bolts.

2. Remove the two bolts covers using a standard flat

tip screwdriver.

3. Remove the two bolts from the lamp assembly.

4. Carefully remove the lamp assembly away from the

vehicle by pulling the assembly straight out to expose

the bulb socket.

5. Remove the bulb socket from the

lamp assembly by turning it

counterclockwise.

Maintenance 347

2013 Explorer (exp)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 342 343 344 345 346 347 348 349 350 351 352 ... 575 576

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Explorer v.1 Manuel d'utilisateur Page 347

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Explorer v.1