Ford 2013 Explorer v.1 Manuel d'utilisateur télécharger pdf (Page 275)

Blocked Sensors

If a message regarding a blocked

sensor appears in the information

display, the radar signals from the

sensor have been obstructed. The

sensors are located behind a fascia

cover near the driver side of the

lower grille. When the sensors are

obstructed, a vehicle ahead cannot

be detected and the collision

warning system does not function.

The following table lists possible

causes and actions for this message being displayed.

Cause Action

The surface of the radar in the

grille is dirty or obstructed in

some way

Clean the grille surface in front of

the radar or remove the object

causing the obstruction

The surface of the radar in the

grille is clean but the message

remains in the display

Wait a short time. It may take

several minutes for the radar to

detect that it is no longer

obstructed

Heavy rain, spray, snow, or fog is

interfering with the radar signals

The collision warning system is

temporarily disabled. Collision

warning should automatically

reactivate a short time after the

weather conditions improve.

Swirling water, or snow or ice on

the surface of the road may

interfere with the radar signals

The collision warning system is

temporarily disabled. Collision

warning should automatically

reactivate a short time after the

weather conditions improve.

Driving Aids 275

2013 Explorer (exp)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 270 271 272 273 274 275 276 277 278 279 280 ... 575 576

Commentaires sur ces manuels

Pas de commentaire