Ford 2013 Explorer v.1 Manuel d'utilisateur télécharger pdf (Page 327)

100

101

ENGINE OIL DIPSTICK

A.–MIN

B. – MAX

ENGINE OIL CHECK

Note: Check the level before starting the engine.

Note: Make sure that the level is between the MIN and MAX marks.

1. Make sure that your vehicle is on level ground.

2. Turn the engine off and wait 10 minutes for the oil to drain into the oil

pan.

3. Remove the dipstick and wipe it with a clean, lint-free cloth. Replace

the dipstick and remove it again to check the oil level.

If the level is at the MIN mark, add oil immediately.

Adding engine oil

Note: Do not remove the filler cap when the engine is running.

Note: Do not add engine oil further than the MAX mark. Oil levels above

the MAX mark may cause engine damage.

Only use oils certified for gasoline engines by the

American Petroleum Institute (API). An oil with this

trademark symbol conforms to the current engine and

emission system protection standards and fuel

economy requirements of the International Lubricant

Standardization and Approval Committee (ILSAC),

comprised of U.S. and Japanese automobile

manufacturers.

1. Remove the filler cap.

2. Add engine oil that meets Ford specifications. See Capacities and

Specifications for more information.

3. Replace the filler cap. Turn it until you feel a strong resistance.

Maintenance 327

2013 Explorer (exp)

Owners Guide gf, 1st Printing

USA (fus)

1 2 ... 322 323 324 325 326 327 328 329 330 331 332 ... 575 576

Commentaires sur ces manuels

Pas de commentaire

Ford 2013 Explorer v.1 Manuel d'utilisateur Page 327

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Ford 2013 Explorer v.1