Ford 2012 Explorer v.2 Manuel d'utilisateur télécharger pdf (Page 162)

Memory feature (if equipped)

This system allows automatic

positioning of the driver seat, power

mirrors and power adjustable foot

pedals (if equipped) to three

programmable positions.

The memory control is located on

the driver’s door.

• To program position 1, move the

memory features to the desired

positions using the associated

controls. Press and hold button 1 for at least two seconds. A chime

will sound confirming that a memory position has been set.

• To program position 2 and 3, repeat the previous procedure using the

respective buttons.

A memory position may be programmed at any time.

To program the memory feature to a remote entry transmitter, refer to

Remote entry system in the Locks and Security chapter.

A programmed memory position can be recalled:

• in any gearshift position if the ignition is not on.

• only in P (Park) or N (Neutral) if the ignition is on.

The memory positions are also recalled when you press your remote

entry transmitter

(unlock) control (if the transmitter is programmed

to a memory position) or, when you enter a valid personal entry code

that is programmed to a memory position. The mirrors will move to the

programmed position and the seat will move to the easy entry position.

The seat will move to the final position when the ignition is activated (if

easy entry feature is enabled).

Easy entry/exit feature (if equipped)

This feature automatically moves the driver’s seat rearward 2 in. (5 cm)

when:

• the transmission is in N (Neutral) or P (Park)

• the key is removed from the ignition cylinder or the push button start

system (if equipped) is switched off (refer to Push button start

system in the Driving chapter).

Seating and Safety Restraints

162

2012 Explorer (exp)

Owners Guide, 2nd Printing

USA (fus)

1 2 ... 157 158 159 160 161 162 163 164 165 166 167 ... 437 438

Pas de commentaire

Ford 2012 Explorer v.2 Manuel d'utilisateur Page 162